Professional Manufacturer with Auto Bearings and Parts
- Auto Bearings
- Wheel Bearings
- Bearing Kit
- King pin kit
- Hub Units
- Water Pump Bearings
- Clutch Release Bearings
- Tensioner Bearings
- Air Conditioner Bearings
- Steering wheel bearings
- Universal Joint Kit
- Bearings
- Taper Roller Bearings
- Cylindrical Roller Bearings
- Miniature Bearings
- Dental Bearings
- Angular Contact Bearings
- Ball Bearings
- Needle Bearings
- Insert Bearings
- Agriculture Bearings
- Pillow Blocks
- Plain Bearings
- Self-Lubrication Bearings
- Self-aligning ball bearings
- Linear Motion Bearings
- Thrust Bearings
Insert bearings
The out ring of the insert bearings are spherical.They are designed in the way almost the same as deep groove ball bearing.The design of the insert bearings allow them to be easily mounted into a housing block and be self-aligning.
SA type
| Bearing No. | Dimension | |||||||||
| d | D | B | C | L | W | K | r(min) | G6.8 | ds | |
| SA201 | 12mm | 40 | 19 | 12 | 28.6 | 28.5 | 13.5 | 0.6 | 4.8 | 1/4-28 M6*1 |
| SA201-8 | 1/2 | |||||||||
| SA202 | 15mm | |||||||||
| SA202-10 | 5/8 | |||||||||
| SA203 | 17mm | |||||||||
| SA204 | 20mm | 47 | 21.4 | 14 | 31 | 32 | 13.5 | 1 | 4.8 | 1/4-28 M6*1 |
| SA204-12 | 3/4 | |||||||||
| SA205 | 25mm | 52 | 21.4 | 15 | 31 | 38.1 | 13.5 | 1 | 4.8 | 1/4-28 M6*1 |
| SA205-14 | 7/8 | |||||||||
| SA205-15 | 15/16 | |||||||||
| SA205-16 | 1 | |||||||||
| SA206 | 30mm | 62 | 23.8 | 16 | 35.7 | 44.4 | 15.9 | 1 | 6 | 5/16-24 M8*1 |
| SA206-17 | 1 1/16 | |||||||||
| SA206-18 | 1 1/8 | |||||||||
| SA206-19 | 1 3/16 | |||||||||
| SA206-20 | 1 1/4(s) | |||||||||
| SA207 | 35mm | 72 | 25.4 | 17 | 38.9 | 55.6 | 17.5 | 1.1 | 6.8 | 5/16-24 M8*1 |
| SA207-20 | 1 1/4 | |||||||||
| SA207-21 | 1 5/16 | |||||||||
| SA207-22 | 1 3/8 | |||||||||
| SA207-23 | 1 7/16 | |||||||||
| SA208 | 40mm | 80 | 30.1 | 18 | 43.7 | 60.3 | 18.3 | 1.1 | 6.8 | 5/16-24 M8*1 |
| SA208-24 | 1 1/2 | |||||||||
| SA208-25 | 1 9/16 | |||||||||
| SA209 | 45mm | 85 | 30.1 | 19 | 43.7 | 63.5 | 18.3 | 1.1 | 6.8 | 5/16-24 M8*1 |
| SA209-26 | 1 5/8 | |||||||||
| SA209-27 | 1 11/16 | |||||||||
| SA209-28 | 1 3/4 | |||||||||
| SA210 | 50mm | 90 | 30.1 | 20 | 43.7 | 69.8 | 18.3 | 1.1 | 6.8 | 5/16-24 M8*1 |
| SA210-29 | 1 13/16 | |||||||||
| SA210-30 | 1 7/8 | |||||||||
| SA210-31 | 1 15/16 | |||||||||
| SA210-32 | 2(s) | |||||||||
| SA211 | 55mm | 100 | 32.5 | 21 | 48.4 | 76.2 | 20.3 | 15 | 8 | 3/8-24 M10*1.25 |
| SA211-32 | 2 | |||||||||
| SA211-33 | 2 1/16 | |||||||||
| SA211-34 | 2 1/8 | |||||||||
| SA211-35 | 2 3/16 | |||||||||
| SA212 | 60mm | 110 | 33.4 | 22 | 49.2 | 84.1 | 22.2 | 1.5 | 8 | 3/8-24 M10*1.25 |
| SA212-36 | 2 1/4 | |||||||||
| SA212-37 | 2 5/16 | |||||||||
| SA212-38 | 2 3/8 | |||||||||
| SA212-39 | 2 7/16 | |||||||||